/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q.44 A U-shaped tube, open to the air... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

A U-shaped tube, open to the air on both ends, contains mercury. Water is poured into the left arm until the water column is 10.0cmdeep. How far upward from its initial position does the mercury in the right arm rise?

Short Answer

Expert verified

The rise in the level of the mercury in the right arm, from its initial position is3.68mm

Step by step solution

01

Step 1:Introduction

We know that water and mercury are liquids that are both incompressible and immiscible.

The diagram which can support the fact is given below :

02

Pressure Diffraction

As we know that the water floats on top of the mercury in the left arm, pushing it down from its initial position.

This will happen because the mercury levels are identical at the point1and 2in the figure, the pressure at the point 1and 2in the figure must be equal.

Hence, we can say that if the pressures at the sites and are not equal, the fluid will flow in a way that violates the static equilibrium requirement.

03

Explanation

In the figure, the pressure at the point 1is due to water having depth of 10cm.

P1=Patm+ÒÏwatergd............(1)

Here, patmis the atmospheric pressure P1is the pressure at point 1, ÒÏwateris the density of the water, ggis the acceleration,

due to gravity, and dwateris the depth of water.

04

Step 4:Mercury

Because mercury is an incompressible fluid, it will travel down a distance xin the left arm while travelling up a distance xin the right arm.

This implies that the pressure at point 2is due to the mercury having a depth of 2x.

Now, we can see that the pressure at point 2is P2=Patm+ÒÏHggdHg

In the above expression here, Patmis the atmospheric pressure P2is the pressure at point 2, ÒÏHgis the density of the mercury. gis the acceleration due to gravity, and dHgis the depth of mercury.

Substitute 2xfor dHg2x

P2=Patm+2ÒÏHggx

Equate the equation (1)and (2)

Patm+ÒÏwatergdwater=Patm+2ÒÏHggx

05

Rearrange Equation

Rearrange the above equation in terms of x

x=12ÒÏwaterÒÏHgdwater

Substitute 1000kg/m3for ÒÏwater,13,600kg/m3for ÒÏHg,10cmfor dwater

x=121000kg/m313,600kg/m3(10cm)

=3.68mm

The temperature in the right arm has increased 3.68mmfrom its original

position.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A 3.0-m-tall, 50-cm-diameter concrete column supports a 200,000 kg load. By how much is the column compressed?

a. A liquid of density ÒÏflows at speed v0through a horizontal pipe that expands smoothly from diameter d0to a larger diameter d1. The pressure in the narrower section is p1. Find an expression for the pressure p0in the wider section.

b. A pressure gauge reads 50kPaas water flows at 10.0m/sthrough a 16.8−cm-diameter horizontal pipe. What is the reading of a pressure gauge after the pipe has expanded to 20.0cmin diameter?

A cylinder with cross-section area Afloats with its long axis vertical in a liquid of density ÒÏ.

a. Pressing down on the cylinder pushes it deeper into the liquid. Find an expression for the force needed to push the cylinder distance xdeeper into the liquid and hold it there.

b. A 4.0-cm-diameter cylinder floats in water. How much work must be done to push the cylinder 10cmdeeper into the water?

Glycerin is poured into an open U-shaped tube until the height in both sides is 20cm. Ethyl alcohol is then poured into one arm until the height of the alcohol column is 20cm. The two liquids do not mix. What is the difference in height between the top surface of the glycerin and the top surface of the alcohol?

The tank shown in FIGURECP14.72is completely filled with a liquid of density ÒÏ. The right face is not permanently attached to the tank but, instead, is held against a rubber seal by the tension in a spring. To prevent leakage, the spring must both pull with sufficient strength and prevent a torque from pushing the bottom of the right face out.

a. What minimum spring tension is needed?

b. If the spring has the minimum tension, at what height dfrom the bottom must it be attached?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.