/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q. 5 The two loops of wire in FIGURE ... [FREE SOLUTION] | 91影视

91影视

Log out

Learning Materials

Features

Discover

Chapter 30: Q. 5 (page 868)

The two loops of wire in FIGURE are stacked one above the other. Does the upper loop have a clockwise current, a counterclockwise current, or no current at the following times? Explain. a. Before the switch is closed.

b. Immediately after the switch is closed.

c. Long after the switch is closed.

d. Immediately after the switch is reopened.

Short Answer

Expert verified

(a) There is no magnetic flux change before the switch is closed.

(b) immediately after the switch is closed, current flows clockwise.

(c) long after the switch is closed, the current in the lower loop remains constant.

(d) Immediately after the switch is reopened, current flows in the opposite direction.

Step by step solution

01

Introduction

A switch loop is another term for a wiring circuit constructed to link a light fixture to a wall switch in layman's terms. Instead of pulling a cord every time you want to turn on or off a light, you simply flip a switch or press a button.

02

Explanation

(a) There is no current. Because there is no change in magnetic flux, no magnetic field is induced.

(b) clockwise. An increase in counterclockwise current in the lower loop causes an increase in the upper loop's upward pointing magnetic field. As a result of the clockwise current in the loop, a downward magnetic field is induced.

(c) There is no current. The current in the bottom loop is always constant. As a result, the flux via the top loop remains unchanged.

(d) counterclockwise. The lower loop's decreasing current leads the flux through the higher loop to drop, resulting in an upward magnetic field.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Your camping buddy has an idea for a light to go inside your tent. He happens to have a powerful and heavy horseshoe magnet that he bought at a surplus store. This magnet creates a 0.20Tfield between two pole tips 10cmapart. His idea is to build the hand-cranked generator shown in FIGURE .He thinks you can make enough current to fully light a 1.0鈩�lightbulb rated at 4.0W. That鈥檚 not super bright, but it should be plenty of light for routine activities in the tent.

a. Find an expression for the induced current as a function of time if you turn the crank at frequency f. Assume that the semicircle is at its highest point at t=0s.

b. With what frequency will you have to turn the crank for the maximum current to fully light the bulb? Is this feasible?

Let's look at the details of eddy-current braking. A square CALC loop, lengthlon each side, is shot with velocityv0into a uniform magnetic field localid="1648921142252" B. The field is perpendicular to the plane of the loop. The loop has mass localid="1648921150406" mand resistancelocalid="1648921154874" R,and it enters the field atlocalid="1648921174281" t=0s. Assume that the loop is moving to the right along thelocalid="1648921181007" x-axis and that the field begins atlocalid="1648921198444" x=0m.

a. Find an expression for the loop's velocity as a function of time as it enters the magnetic field. You can ignore gravity, and you can assume that the back edge of the loop has not entered the field.

b. Calculate and draw a graph oflocalid="1648921211473" vover the intervallocalid="1648921223129" 0s鈮�t鈮�0.04sfor the case thatlocalid="1648816410574" width="87">v0=10m/s,localid="1648921234041" l=10cm,localid="1648921244487" m=1.0g,localid="1648921254639" R=0.0010惟,and localid="1648921264943" B=0.10T. The back edge of the loop does not reach the field during this time interval.

86. III High-frequency signals are often transmitted along a coaxial CALC cable, such as the one shown in FIGURE CP30.86. For example, the cable TV hookup coming into your home is a coaxial cable. The signal is carried on a wire of radius while the outer conductor of radius is grounded. A soft, flexible insulating material fills the space between them, and an insulating plastic coating goes around the outside.

a. Find an expression for the inductance per meter of a coaxial cable. To do so, consider the flux through a rectangle of length that spans the gap between the inner and outer conductors.

b. Evaluate the inductance per meter of a cable havingr1=0.50mm andr2=3.0mm .

70. II The current through inductance Lis given byI=I0e鈭�t/蟿 .

CALC a. Find an expression for the potential difference 螖VLacross the inductor.

b. Evaluate 螖VLat t=0,1.0, and 3.0msif L=20mH,I0=50mA, and 蟿=1.0ms.

The earth's magnetic field strength is5.0脳10鈭�5T . How fast would you have to drive your car to create a 1.0Vmotional emf along your 1.0鈭�m-tall radio antenna? Assume that the motion of the antenna is perpendicular toB鈫� .
See all solutions

Recommended explanations on Physics Textbooks

Turning Points in Physics

Read Explanation

Electromagnetism

Read Explanation

Magnetism

Read Explanation

Energy Physics

Read Explanation

Engineering Physics

Read Explanation

Solid State Physics

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.