/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q4 CP A solid uniform-density sphere i... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

A solid uniform-density sphere is tied to a rope and moves in a circle with speed v. The distance from the center of the circle to the center of the sphere is d, the mass of the sphere is M, and the radius of the sphere is R. (a) What is the angular speed Ó¬? (b) What is the rotational kinetic energy of the sphere? (c) What is the total kinetic energy of the sphere?

Short Answer

Expert verified

(a) vd

(b) 1225MR2vd2

(c) 12Md2+25MR2vd2

Step by step solution

01

Identification of the given data

The given data is listed below as,

  • The velocity of the solid-uniform density sphere is v.
  • The distance from the center of the circle to the center of the sphere is d.
  • The sphere’s mass is M.
  • The sphere’s radius is R.
02

Significance of the moment of inertia of the sphere

The moment of inertia for a body state that the force that a body exhibits while rotating about an axis is due to the application of a turning force which is torque.

The equation of the rotational kinetic energy of the sphere can be expressed as,

K.ER=12ΙӬ2 …(1)

Here, I is the moment of inertia of the sphere and Ó¬is the angular velocity of the sphere.

The equation of the translational kinetic energy of the sphere is be expressed as,

K.ET=12Mv2 …(2)

Here, M is the mass of the sphere and v is the velocity of the sphere at center of mass of the sphere.

03

Determination of the angular speed

The equation of the angular speed can be expressed as,

Ó¬=vr

Here, vis the velocity and r is the distance of the centre of the circle to the centre of the sphere.

For r=d,

Ó¬=vd

Thus, the angular speed is Ó¬=vd.

04

Determination of the rotational energy

The expression for the moment of inertia of the sphere is expressed as,

I=25MR2

Here, Mis the mass of the sphere and Ris the radius of the sphere.

For I=25MR2and Ó¬=vdin equation (1).

K.ER=12×25MR2×vd2

=1225MR2vd2

Thus, the rotational kinetic energy of the sphere is 1225MR2vd2.

05

Determination of the total kinetic energy

For v=Ó¬din equation (2).

K.ET=12MÓ¬d2

=12Md2

The expression for the total kinetic energy is expressed as,

K.E=K.ET+K.ER

For K.ET=12Md2and K.ER=1225MR2vd2.

role="math" localid="1654147660681" K.E=12Md2role="math" localid="1654147958776" +1225MR2vd2

role="math" localid="1654148067935" =12Md2+25MR2vd2

Thus, the total kinetic energy of the sphere is12Md2+25MR2×vd2.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A sphere or cylinder of mass M, radius R and moment of inertia I rolls without slipping down a hill of height h, starting from rest. As explained in problem P.33, if there is no slipping Ó¬=vCM/R. (a) In terms of given variables (M,R,I and h), what is VCM at the bottom of hill? (b) If the object is a thin hollow cylinder, what is VCM at the bottom of hill? (c) If the object is a uniform density hollow cylinder, ), what isVCM at the bottom of hill? (d) If the object is a uniform density sphere what is VCM at the bottom of hill? An interesting experiment that you can perform that is to roll various objects down an inclined board and see how much time each one takes to reach the bottom.

Two identical 0.4 kgblock (labeled 1 and 2) are initially at rest on a nearly frictionless surface, connected by an unstretched spring, as shown in the upper portion of Figure 9.59.

Then a constant force of 100 N to the right is applied to block 2 and at a later time the blocks are in the new positions shown in the lower portion of Figure 9.59.9.59. At this final time, the system is moving to the right and also vibrating, and the spring is stretched. (a) The following questions apply to the system modeled as a point particle. (i) What is the initial location of the point particle? (ii) How far does the point particle move? (iii) How much work was done on the particle? (iv) What is the change in translational kinetic energy of this system? (b) The following questions apply to the system modeled as an extended object. (1) How much work is done on the right-hand block? (2) How much work is done on the left-hand block? (3) What is the change of the total energy of this system? (c) Combine the results of both models to answer the following questions. (1) Assuming that the object does not get hot, what is the final value of Kvib+Uspringfor the extended system? (2) If the spring stiffness is 50 N/m, what is the final value of the vibrational kinetic energy?

A cylindrical rod of uniform density is located with its center at the origin, and its axis along the x axis. It rotates about its center in the xy plane, making one revolution every 0.03 s. rod has a radius of 0.08 m, length of 0.7 m, and mass of 5 kg. It makes one revolution every 0.03 s. What is the rotational kinetic energy of the rod?

You pull straight up on the string of a yo-yo with a force 0.235 N, and while your hand is moving up a distance 0.18 m, the yo-yo moves down a distance 0.70 m. The mass of the yo-yo is 0.025 kg, and it was initially moving downward with speed 0.5 m/s and angular speed 124 rad/s. (a) What is the increase in the translational kinetic energy of the yo-yo? (b) What is the new speed of the yo-yo? (c) What is the increase in the rotational kinetic energy of the yo-yo? (d) The yo-yo is approximately a uniform-density disk of radius 0.02 m. What is the new angular speed of the yo-yo?

A runner whose mass is 50kgaccelerates from a stop to a speed of 10m/sin 3s. (A good sprinter can run 100min about 10s, with an average speed of 10m/s.) (a) What is the average horizontal component of the force that the ground exerts on the runner’s shoes? (b) How much displacement is there of the force that acts on the sole of the runner’s shoes, assuming that there is no slipping? Therefore, how much work is done on the extended system (the runner) by the force you calculated in the previous exercise? How much work is done on the point particle system by this force? (c) The kinetic energy of the runner increases—what kind of energy decreases? By how much?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.