/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q9P Question: A meter stick balances... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

Question: A meter stick balances horizontally on a knife-edge at the 50 cm mark. With two 5.00 gm coins stacked over the 12.00 cmmark, the stick is found to balance at the 45.5 cm mark. What is the mass of the meter stick?

Short Answer

Expert verified

Answer:

The mass of the meter stick is 74.4 g

Step by step solution

01

Understanding the given information

  • The meter stick balances on the knife-edge before coins are stacked at the x3=50.0cm=0.50mmark.
  • The meter stick balances on the knife-edge when coins are stacked at thex2=45.5cm=0.455mmark.
  • Mass of both coins, m = 10 .00 gm
  • The coins are stacked over the meter stick at thex1=12.0cm=0.12mmark
02

Concept and formula used in the given question

Using the condition for static equilibrium, you can write that the net torque point acting at the pivot point is zero. From that, you can get an equation. After solving it, you will get the mass of the meter stick. The formula used is given below.

At static equilibrium:

τnet=0

03

Calculation for the mass of the meter stick

The free body diagram:

At static equilibrium, the torque about point becomes zero.

So,

Mgx3-x2-mgx2-x1=0Mgx3-x2=mgx2-x1M=mgx2-x1gx3-x2=mx2-x1x3-x2=100.455-0.1200.5-0.455=74.4g

Hence, the mass of the meter stick is 74.4 g

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Question: A scaffold of mass 60 Kg and length 5.0 m is supported in a horizontal position by a vertical cable at each end. A window washer of mass 80 kg stands at a point1.5 mfrom one end. What is the tension in (a) the nearer cable and (b) the farther cable?

The rigid square frame in Fig. 12-79 consists of the four side bars AB ,BC , CD , and DA plus two diagonal bars ACand BD , which pass each other freely at E. By means of the turnbuckle G, bar ABis put under tension, as if its ends were subject to horizontal, outward forcesT→ of magnitude535 N .

(a) Which of the other bars are in tension? What are the magnitudes of (b) the forces causing the tension in those bars and (c) the forces causing compression in the other bars?

In Fig. 12-69, a package of mass mhangs from a short cord that is tied to the wall via cord 1 and to the ceiling via cord 2. Cord 1 is at angleϕ=40°with the horizontal; cord 2 is at angleθ. (a) For what value of θis the tension in cord 2 minimized? (b) In terms of mg, what is the minimum tension in cord 2

The system in Fig. 12-38 is in equilibrium. A concrete block of mass225kghangs from the end of the uniform strut of mass45.0kg. A cable runs from the ground, over the top of the strut, and down to the block, holding the block in place. For anglesϕ=30.0°andθ=45.0°, find (a) the tension Tin the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge.

Question: Because gvaries so little over the extent of most structures, any structure’s center of gravity effectively coincides with its center of mass. Here is a fictitious example where gvaries more significantly. Figure 12-25 shows an array of six particles, each with mass m, fixed to the edge of a rigid structure of negligible mass. The distance between adjacent particles along the edge is 2.00 m. The following table gives the value of g (m/s2)at each particle’s location. Using the coordinate system shown, find (a) the xcoordinate xcom and (b) the ycoordinate Ycom of the center of mass of the six-particle system. Then find (c) the xcoordinate xcog and (d) the ycoordinateYcogof the center of gravity of the six-particle system.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.