/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q85P The starting motor of a car is t... [FREE SOLUTION] | 91影视

91影视

The starting motor of a car is turning too slowly, and the mechanic has to decide whether to replace the motor, the cable, or the battery. The car鈥檚 manual says that the12Vbattery should have no more than0.020 internal resistance; the motor should have no more than 0.200resistance, and the cable no more than 0.040resistance. The mechanic turns on the motor and measures 11.4Vacross the battery, a 3.0Vcross the cable, and a current of 50A. Which part is defective?

Short Answer

Expert verified

The cable part of the motor is defective.

Step by step solution

01

The given data

  • a) The potential of the battery should have no more internal resistance r1=0.020, is =12V.
  • b)The motor should have no more resistance,R1=0.200.
  • c) The cable should have no more resistance,R2=0.040 .
  • d)Potential measured across the battery, Vbattery =11.4V .
  • e) Potential measured across the cable, Vcable= 3.0V.
  • f) The current of the motor, i=50A.
02

Understanding the concept of resistance

In the given problem, it can be seen that there is a limit set to every resistance value of the different parts of the motor. Thus, if the resistance value when exceeds the limit value, that part stops working due to the over resistance barrier to the current flow.

Formula:

The voltage equation using Ohm鈥檚 law,

V=IR (i)

HereR is the resistance and I is the current.

03

Calculation to check the defective part of the motor

All three circuit elements are connected in series, so the current is the same in all of them. The battery is discharging, so the potential drop across the terminals is given using equation (i) as follows:

Vbattery=-ir (a)

Now, the internal resistance of the battery can be given using equation (a), and the given data is as follows:

r=-Vbatteryi

Substitute the values in the above equation, and we get,

r=12V-11.4V50A=0.012

The above value is less than that given in the problem, that is0.012. Thus the battery is working.

Now, the resistance value of the motor can be given using the given data in equation (i) as follows:

Rmotor=Vbattery-Vcablei

Substitute the values in the above equation, and we get,

Rmotor=11.4V-3.0V50A=0.17

The above value is less than that given in the problem, that is0.20. Thus, the motor is also working.

Now, the resistance value of the cable can be given using the given data in equation (i) as follows:

Rcable=3.0V50A=0.060

The above value is greater that given in the problem that is0.040. Thus, the cable is also defective.

Hence, the cable part is defective.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Res-monster maze.In Fig. 27-21, all the resistors have a resistance of4.0 and all the (ideal) batteries have an emf of 4.0 V. What is the current through resistor R? (If you can find the proper loop through this maze, you can answer the question with a few seconds of mental calculation.)

In Fig. 27-83, 1=6.00鈥塚,2=12.0鈥塚,R1=200, andR2=100. What are the

(a) size and

(b) direction(up or down) of the current through resistance 1, the

(c) size and

(d) direction of the current through resistance 2, and the

(e) size and

(f) direction of the current through battery 2?

The figure shows a section of a circuit. The resistances are R1=2.0 , R2=4.0and R3=6.0, and the indicated current is I=6.0A . The electric potential difference between points A and B that connect the section to the rest of the circuit is VAVB=78V . (a) Is the device represented by 鈥淏ox鈥 absorbing or providing energy to the circuit, and (b) At what rate?

A copper wire of radius a=0.250mmhas an aluminium jacket of outer radiusb=0.380mm. There is a currenti=2.00Ain the composite wire. Using Table 26-1, calculate the current in (a) the copper and (b) the aluminium. (c) If a potential differenceV=12.0Vbetween the ends maintains the current, what is the length of the composite wire?

Figure shows a circuit of four resistors that are connected to a larger circuit. The graph below the circuit shows the electric potential V(x) as a function of position xalong the lower branch of the circuit, through resistor 4; the potential VAis 12.0 V. The graph above the circuit shows the electric potential V(x) versus position x along the upper branch of the circuit, through resistors 1, 2, and 3; the potential differences are螖痴B2.00 V and螖痴C5.00 V. Resistor 3 has a resistance of 200 鈩. What is the resistance of (a) Resistor 1 and (b) Resistor 2?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.