/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q72P In Fig. 27-70, the ideal battery... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

In Fig. 27-70, the ideal battery has emf ε=30.0V, and the resistances areR1=R2=14Ω, R3=R4=R5=6.0Ω, R6=2.0Ω, and R7=1.5Ω. What are currents (a)i2, (b) i4, (c) i1, (d) i3, and (e)i5 ?

Fig. 27-70

Short Answer

Expert verified
  1. The currenti2 is 3.0A.
  2. The current i4 is 10.0A.
  3. The currenti1 is 13.0A.
  4. The currenti3 is 1.5A.
  5. The current i5is 7.5A.

Step by step solution

01

The given data

  1. Emf of the ideal battery,ε=30.0V
  2. The given resistances are:R1=R2=14ΩR3=R4=R5=6ΩR6=2.0ΩR7=1.5Ω
02

Understanding the concept of current

In a circuit with several resistors and an ideal battery, the current flow differs due to many conditions. For resistors parallel to each other, the current flowing through them differs, and that of the current value divides into equal values at the junction. Thus, using the concept of voltage law, the current through each resistor as given in the figure can be written and further calculated following the given data.

Formula:

The voltage equation using Ohm’s law, V=IR (i)

The equivalent resistance for a series combination, Req=∑inRn (ii)

The equivalent resistance for a parallel combination,Req=∑in1Rn (iii)

Kirchhoff’s voltage law, ∑closedloopV=0 (iv)

Kirchhoff’s junction rule, Iin=Iout (v)

03

Calculation of the current i2 

(a)

The equivalent resistance of the four resistors on the left side is given using equation (ii) and (iii) as follows:

Req=R12+R34=R1R2R1+R2+R3R4R3+R4=(14Ω)(14Ω)14Ω+14Ω+(6Ω)(6Ω)6Ω+6Ω=7.0Ω+3.0Ω

Now, the current valuei2 can be calculated using the emf of the battery in equation (i) as follows:

i2=30V10Ω=3.0A

Hence, the value of the current is 3.0A.

04

Calculation of the current i4

(b)

The combination of the three resistors on the right will give the equivalent resistance using equations (ii) and (iii) as follows:

Req'=R56+R7=R5R6R5+R6+R7=(6Ω)(2Ω)6Ω+2Ω+1.5Ω=3.0Ω

Now, the current valuei4 can be calculated using the emf of the battery in equation (i) as follows:

i4=30V3Ω=10.0A

Hence, the value of the current is 10.0A.

05

 Calculation of the current i1 

(c)

By the junction rule that is equation (v), the current valuei1 can be calculated as follows:

i1=i2+i4=3.0A+10.0A=13.0A

Hence, the value of the current is 13.0A.

06

Calculation of the current i3

(d)

By concept of the symmetry, the current value i1can be calculated as follows:

i3=i22=3.0A2=1.5A

Hence, the value of the current is 1.5A.

07

Calculation of the current i5

(e)

By the loop rule from equation (iv), the current i5 can be calculated as follows:

ε−i4(R7)−i5(R6)=030V−10A(1.5Ω)−i5(2.0Ω)=0i5=15V2.0Ω=7.5A

Hence, the value of the current is 7.5A.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Both batteries in Figure

(a) are ideal. Emfε1 of battery 1 has a fixed value, but emf ε1of battery 2 can be varied between 1.0Vand10V . The plots in Figure

(b) give the currents through the two batteries as a function ofε2 . The vertical scale is set by isis=0.20A . You must decide which plot corresponds to which battery, but for both plots, a negative current occurs when the direction of the current through the battery is opposite the direction of that battery’s emf.

(a)What is emfε1 ?

(b) What is resistanceR1 ?

(c) What is resistance R2?

In Figure,ε1=3.00V,ε2=1.00V , R1=4.00 Ω, R1=2.00 Ω , R1=5.00 Ω and both batteries are ideal. (a) What is the rate at which energy is dissipated in R1 ? (b) What is the rate at which energy is dissipated in R2? (c) What is the rate at which energy is dissipated in R3? (d) What is the power of battery 1? (e) What is the power of battery 2?

The circuit of Fig. 27-75 shows a capacitor, two ideal batteries, two resistors, and a switch S. Initially S has been open for a long time. If it is then closed for a long time, what is the change in the charge on the capacitor? Assume,C=10μ¹ó,ε1=1.0V ,ε1=3.0V , R1=0.20ΩandR2=0.40Ω.

In Fig. 27-81, the ideal batteries have emfs ε1=20V,ε2=10 V ,ε3=5 , andε4=5 V , and the resistances are each2.00Ω . What are the

(a) size and

(b) direction (left or right) of currenti1and the

(c) size and

(d) direction of current?(This can be answered with only mental calculation.) (e) At what rate is energy being transferred in battery 4, and

(f) is the energy being supplied or absorbed by the battery?

In Fig. 27-53, the resistors have the values R1=7.00Ω, R2=12.00Ω, and R3=4.00Ω, and the ideal battery’s emf isε=24.0V. For what value of R4will the rate at which the battery transfers energy to the resistors equal (a)60.0 W, (b) the maximum possible rate Pmax, and (c) the minimum possible rate Pmin? What are (d)Pmaxand (e)Pmin?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.