/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} QBE Would indigo tetrasulfonate be a... [FREE SOLUTION] | 91影视

91影视

Would indigo tetrasulfonate be a suitable redox indicator for the titration of Fe(CN)64-with TI3+in 1MHCI? (Hint: The potential at the equivalence point must be between the potentials for each redox couple.)

Short Answer

Expert verified

The indicator would not be used as a redox indicator for this titration

Step by step solution

01

Definition of Redox titrations and redox indicator

  • In an acid-base titration, indicators, and electrodes are commonly used to record the redox titration's end point.
  • Redox indicator: A chemical that changes color when it transitions from an oxidized to a reduced state.
02

Determine the titration of Fe(CN)64with TI3+in 1 MHCI

For the purpose of titration of FeCN64withTI3+in1MCHI, It has to be explained why indigo tetrasulfonate would be a good redox indicator.

To clarify, indigo tetrasulfonate will work as a redox indicator in the following titration.

Indigo tetrasulfonate has a typical potential of 0.36 V

The potential at the equivalence point must be in the middle of each redox couple's potential. FeCN63-FeCN64,0.356;TI3+TTI+,0.77V

The endpoint potential would be between 0.356 and 0.77 V. However, approaching the potential of 0.36 V, indigo tetrasulfonate changes color. As a result, for this titration, the indicator would not be employed as a redox indicator.

The indigo tetrasulfonate was discovered to be unsuitable as a redox indicator for the titration of FeCN64with TI3+in 1MHCI .

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A titration of\(50.0\;mL\)of unknown\(F{e^{2 + }}\)with\(0.100MCe\)at\(2{5^\circ }C\), monitored with Pt and calomel electrodes, gave data in the table.\(^9\)Prepare a Gran plot and decide which data lie on a straight line. Find the x-intercept of this line, which is the equivalence volume. Calculate the molarity of\(F{e^{2 + }}\)in the unknown.

Primary-standard-grade arsenic(III) oxide (As4O6)is a useful (but carcinogenic) reagent for standardizing oxidants includingMnO4-andI3-. To standardize MnO4-,As4O6is dissolved in base and then titrated with localid="1655103723885" MnO4-in acid. A small amount of iodide (I-)or iodate (IO3-)catalyzes the reaction betweenH3AsO3andMnO42-.

As4O6+8OH-4HAsO32-+2H2OHAsO32-+2H+H3AsO35H3AsO3+2MnO4-+6H+5H2AsO4+2Mn2++3H2O

(a) A 3.214-g aliquot ofKMnO4(FM 158.034) was dissolved in 1.000Lof water, heated to cause any reactions with impurities to occur, cooled, and filtered. What is the theoretical molarity of this solution ifKMnO4were pure and if none was consumed by impurities?

(b) What mass of localid="1655105254654" As4O6(FM 395.68 ) would be just sufficient to react with25.00mLofKMnO4solution in part (a)?

(c) It was found that0.1468gofAs4O6required 29.985mLofKMnO4ofsolution for the faint color of unreacted MnO4-to appear. In a blank titration,0.03mLofMnO4-was required to produce enough color to be seen. Calculate the molarity of the permanganate solution.

Whenof unknown were passed through a Jones reductor, molybdate ion (MoO42-)was converted into Mo3+. The filtrate required 16.43mLof 0.01033MKMnO4to reach the purple end point.

MnO4-+Mo3+Mn2++MoO22+

A blank required 0.04mL. Balance the reaction and find the molarity of Molybdate in the unknown.

From information in Table 16-3, explain how you would use KMnO4to find the content of (NH4)2S2O8in a solid mixture with(NH4)2S2O4What is the purpose of phosphoric acid in the procedure?

The Kjeldahl analysis in Section 11-8 is used to measure the nitrogen content of organic compounds, which are digested in boiling sulfuric acid to decompose to ammonia, which, in turn, is distilled into standard acid. The remaining acid is then back-titrated with base. Kjeldahl himself had difficulty in 1880 discerning by lamplight the methyl red indicator end point in the back titration. He could have refrained from working at night, but instead he chose to complete the analysis differently. After distilling the ammonia into standard sulfuric acid, he added a mixture of KIO3and KI to the acid. The liberated iodine was then titrated with thiosulfate, using starch for easy end-point detection even by lamplight. Explain how the thiosulfate titration is related to the nitrogen content of the unknown. Derive a relationship between moles ofNH3 liberated in the digestion and moles of thiosulfate required for titration of iodine.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.