91Ó°ÊÓ

The major application of Karl Fischer titration, is in the measurement of traces of water in transformer oil, polymers, solvents, foods, and other substances etc. This procedure is expected to be performed half a million times each day.

The titration is done by transferring the titrant from an automated burette or by coulometric generation of titrant. For large amount of water (but can go as low as $~1{\mathrm{mgH}}_2\mathrm{O}$ ), the volumetric procedure is considered to be suitablewhereas for very little amount of water the coulometric procedure is suitable.

Determinig the percentage of water in polymer using Karl Fischer water analysis.

The required current for water in 0.8476g polymer$\left(63.16-4.23\right)=58.93\mathrm{C}$

No of moles reacted $=\frac{58.93\mathrm{C}}{96485\mathrm{C}/\mathrm{mol}}=0.6108\mathrm{m}{\mathrm{mole}}^{-}$which correspomds to $0.5×0.6108=0.3054\mathrm{m}{\mathrm{moll}}_2$

$\%\mathrm{of}\mathrm{water}=100×\frac{5.502{\mathrm{mgH}}_2\mathrm{O}}{847.6\mathrm{mg}\mathrm{polymer}}=0.6419\mathrm{wt}\%$