91Ó°ÊÓ

When dealing with electrical circuits, especially those having resistors in parallel, understanding equivalent resistance is crucial. Equivalent resistance is a way to simplify complex circuits by reducing multiple resistors into a single one. This simplifies the analysis of the circuit. When resistors are connected in parallel, they share the same voltage but can carry different currents.
The formula to calculate the equivalent resistance for resistors in parallel is:

• \[\frac{1}{R_{eq}} = \frac{1}{R_1} + \frac{1}{R_2} + \ldots + \frac{1}{R_n}.\]

This equation essentially states that the reciprocal of the total resistance is the sum of the reciprocals of each individual resistance.
In our example, we have two resistors, a 42-ohm (Ω) resistor and a 20-ohm resistor in parallel. When applying the formula, we get the equivalent resistance as approximately 13.55 Ω. This means that for purposes of calculating total current or analyzing the circuit further, these two resistors can be replaced with a single resistor of 13.55 Ω.

Ohm's Law is a fundamental principle in electronics that relates voltage, current, and resistance in an electrical circuit. The law is typically expressed by the equation:

• \[V = IR,\]

where \(V\) stands for voltage, \(I\) is the current, and \(R\) represents resistance. This formula is incredibly useful for calculating the missing variable when two of these quantities are known.
For instance, in scenarios where you know the voltage across a resistor and its resistance, you can determine the current flowing through it by rearranging Ohm's Law to:

• \[I = \frac{V}{R}.\]

In the given problem, after finding the equivalent resistance of 13.55 Ω, we employed Ohm's Law to find the total current through the parallel resistors. With a voltage of 240 V, the total current was calculated to be about 17.71 Amperes (A).
This current is then distributed among the parallel resistors, taking into account their equal voltage drops.

Electrical circuits are paths which allow electric charges to move and power various devices. A circuit typically consists of a power source, like a battery, conductors (such as wires), and various components like resistors. Resistors in a circuit control the flow of electrical current by restricting it, which is crucial in protecting delicate components from receiving too much current.
Circuits can be configured in a variety of ways, with parallel and series connections being the most common. In a parallel circuit configuration, components are connected across the same two points, sharing the voltage. Each component is independently connected to the power supply. Therefore, if one path is broken, the current can still travel through other paths.
In our specific case, we examined two resistors arranged in parallel. The total circuit included a 240-V dc line providing the necessary voltage. By understanding the behavior of current and voltage in this parallel configuration, we've been able to calculate the current for each resistor using simple principles of circuit analysis and Ohm's Law, demonstrating fundamental circuit interactions.