/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Problem 14 A current of \(2.50 \mathrm{A}\)... [FREE SOLUTION] | 91影视

91影视

Log out

Learning Materials

Features

Discover

Chapter 18: Problem 14

A current of \(2.50 \mathrm{A}\) is carried by a copper wire of radius $1.00 \mathrm{mm} .\( If the density of the conduction electrons is \)8.47 \times 10^{28} \mathrm{m}^{-3},$ what is the drift speed of the conduction electrons?

Short Answer

Expert verified
Answer: The drift speed of the conduction electrons in the copper wire is approximately \(1.160 \times 10^{-5} \mathrm{m}\mathrm{s}^{-1}\).

Step by step solution

01

Write down the given values

We are given the following values: - Current, \(I = 2.50 \mathrm{A}\) - Radius of the wire, \(r = 1.00 \mathrm{mm} = 1.00 \times 10^{-3} \mathrm{m}\) - Electron density, \(n = 8.47 \times 10^{28} \mathrm{m}^{-3}\) - Elementary charge, \(q = 1.60 \times 10^{-19} \mathrm{C}\) (this is a known constant)
02

Calculate the cross-sectional area of the wire

The cross-sectional area of the wire, \(A\), can be found using the formula for the area of a circle: \(A=\pi r^2\). Substituting the given radius, we have: \(A = \pi (1.00 \times 10^{-3} \mathrm{m})^2 = 3.14 \times 10^{-6} \mathrm{m}^2\)
03

Rearrange the formula for current to find the drift speed

The formula for current is \(I=nqA\upsilon_d\). We want to find the drift speed, \(\upsilon_d\), so we need to rearrange the formula to isolate \(\upsilon_d\): \(\upsilon_d = \frac{I}{nqA}\)
04

Substitute given values and solve for the drift speed

Now we will substitute the given values for \(I\), \(n\), \(q\), and \(A\) into the formula and solve for \(\upsilon_d\): \(\upsilon_d = \frac{2.50 \mathrm{A}}{(8.47 \times 10^{28} \mathrm{m}^{-3})(1.60 \times 10^{-19} \mathrm{C})(3.14 \times 10^{-6} \mathrm{m}^2)}\) \(\upsilon_d \approx 1.160 \times 10^{-5} \mathrm{m}\mathrm{s}^{-1}\) So, the drift speed of the conduction electrons in the copper wire is approximately \(1.160 \times 10^{-5} \mathrm{m}\mathrm{s}^{-1}\).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A potential difference is applied between the electrodes in a gas discharge tube. In 1.0 s, \(3.8 \times 10^{16}\) electrons and \(1.2 \times 10^{16}\) singly charged positive ions move in opposite directions through a surface perpendicular to the length of the tube. What is the current in the tube?
A voltmeter has a switch that enables voltages to be measured with a maximum of \(25.0 \mathrm{V}\) or \(10.0 \mathrm{V}\). For a range of voltages to $25.0 \mathrm{V},\( the switch connects a resistor of magnitude \)9850 \Omega$ in series with the galvanometer; for a range of voltages to \(10.0 \mathrm{V}\), the switch connects a resistor of magnitude \(3850 \Omega\) in series with the galvanometer. Find the coil resistance of the galvanometer and the galvanometer current that causes a full-scale deflection. [Hint: There are two unknowns, so you will need to solve two equations simultaneously.]
A parallel plate capacitor is constructed from two square conducting plates of length \(L=0.10 \mathrm{m}\) on a side. There is air between the plates, which are separated by a distance \(d=89 \mu \mathrm{m} .\) The capacitor is connected to a \(10.0-\mathrm{V}\) battery. (a) After the capacitor is fully charged, what is the charge on the upper plate? (b) The battery is disconnected from the plates and the capacitor is discharged through a resistor \(R=0.100 \mathrm{M} \Omega .\) Sketch the current through the resistor as a function of time \(t(t=0\) corresponds to the time when \(R\) is connected to the capacitor). (c) How much energy is dissipated in \(R\) over the whole discharging process?
We can model some of the electrical properties of an unmyelinated axon as an electric cable covered with defective insulation so that current leaks out of the axon to the surrounding fluid. We assume the axon consists of a cylindrical membrane filled with conducting fluid. A current of ions can travel along the axon in this fluid and can also leak out through the membrane. The inner radius of the cylinder is \(5.0 \mu \mathrm{m} ;\) the membrane thickness is \(8.0 \mathrm{nm} .\) (a) If the resistivity of the axon fluid is \(2.0 \Omega \cdot \mathrm{m},\) calculate the resistance of a 1.0 -cm length of axon to current flow along its length. (b) If the resistivity of the porous membrane is \(2.5 \times 10^{7} \Omega\).m, calculate the resistance of the wall of a 1.0 -cm length of axon to current flow across the membrane. (c) Find the length of axon for which the two resistances are equal. This length is a rough measure of the distance a signal can travel without amplification.
A battery charger delivers a current of \(3.0 \mathrm{A}\) for \(4.0 \mathrm{h}\) to a \(12-\mathrm{V}\) storage battery. What is the total charge that passes through the battery in that time?
See all solutions

Recommended explanations on Physics Textbooks

Torque and Rotational Motion

Read Explanation

Nuclear Physics

Read Explanation

Magnetism

Read Explanation

Electricity

Read Explanation

Quantum Physics

Read Explanation

Radiation

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.