/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q37P In Fig. 12-51, a uniform plank, ... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

In Fig. 12-51, a uniform plank, with a lengthLof 6.10 m and a weight of445 N , rests on the ground and against a frictionless roller at the top of a wall of height h=3.05 m. The plank remains in equilibrium for any value of θ≥70° but slips if θ<70°. Find the coefficient of static friction between the plank and the ground.

Short Answer

Expert verified

Coefficient of static friction between plank and ground μ=0.34.

Step by step solution

01

Listing the given quantities

The weight of plank is,W=445 N.

The length of the plank is,L=6.10 m.

The plank is at height,h=3.05 m.

The angle of inclination is,θ=70∘.

02

Understanding the concept of friction force

To find the coefficient acceleration, use the condition of equilibrium.Using this condition, we can write the equation for the net force and net torque. Solving these equations, we can find the coefficient of friction.

03

Free Body Diagram

HereFf is the frictional force, F is the external/applied force, and FN is the normal force.

04

Calculation of coefficient of static friction between plank and ground  

The net force in the horizontal direction can be written as,

Fsinθ−Ff=0Ff=Fsinθ (1)

The net force in the verticle direction can be written as,

Fcosθ−W+FN=0Fcosθ=W−FNF=W−FNcosθ

(2)

Substitute the value from equation 2 into equation 1, and we get,

Ff=tanθ(W−FN) (3)

The equation for the net torque can be written as,

FNd−Ffh−W(d−L2cosθ)=0

Substitute the values in the above expression, and we get,

FNd−tanθ(W−FN)h−W(d−L2cosθ)=0FN=d−(L2)cosθ+htanθd+htanθFN=W(1−L2hcos2θsinθ) (4)

Substitute the values in equation 3, and we get,

Ff=WLsin2θcosθ2h(5)

Coefficient of static friction between plank and ground can be written as,

μ=Ff/FN

From equations 4 and 5, substitute the values in the above expression, and we get,

μ=Lsin2θcosθ(2h−Lsinθcos2θ)

Substitute the values in the above expression, and we get,

μ=6.10×sin270∘cos70∘(2×3.05−6.10sin70∘cos270∘)=0.34

Thus, the coefficient of static friction between plank and ground is,.μ=0.34

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Fig. 12-44, a 15 kg block is held in place via a pulley system. The person’s upper arm is vertical; the forearm is at angleθ=30o with the horizontal. Forearm and hand together have a mass of 2.0 kg, with a center of mass at distance d1=15 c³¾from the contact point of the forearm bone and the upper-arm bone(humerus). The triceps muscle pulls vertically upward on the forearm at distanced2=2.5 c³¾ behind that contact point. Distanced3is 35 cm. What are the (a)magnitude and (b) direction (up or down) of the force on the forearm from the triceps muscle and the (c) magnitude and (d) direction (up or down) of the force on the forearm from the humerus?

A uniform ladder is 10 m long and weighs 200 N . In Fig. 12-78, the ladder leans against a vertical, frictionless wall at heighth=8.0″¾ above the ground. A horizontal force is applied to the ladder at distance d=2.0″¾from its base (measured along the ladder).

(a) If force magnitudeF=50 N , what is the force of the ground on the ladder, in unit-vector notation?

(b) IfF=150 N , what is the force of the ground on the ladder, also in unit-vector notation?

(c) Suppose the coefficient of static friction between the ladder and the ground is0.38 for what minimum value of the force magnitude Fwill the base of the ladder just barely start to move toward the wall?

Figure 12-57 shows an approximate plot of stress versus strain for a spider-web thread, out to the point of breaking at a strain of 0.200. The vertical axis scale is set by values a=0.12 GN/m2, b=0.30 GN/m2, and c=0.80 GN/m2 . Assume that the thread has an initial length of 0.80 cm, an initial cross-sectional area of 8.0x10-12 m2, and (during stretching) a constant volume. Assume also that when the single thread snares a flying insect, the insect’s kinetic energy is transferred to the stretching of the thread. (a) How much kinetic energy would put the thread on the verge of breaking? What is the kinetic energy of (b) a fruit fly of mass 6.00 mg and speed 1.70 m/s and (c) a bumble bee of mass 0.388 g and speed 0.420 m/s ? Would (d) the fruit fly and (e) the bumble bee break the thread?

A cylindrical aluminum rod, with an initial length of 0.8000″¾ and radius1000.0‰ӾÀ , is clamped in place at one end and then stretched by a machine pulling parallel to its length at its other end. Assuming that the rod’s density (mass per unit volume) does not change, find the force magnitude that is required of the machine to decrease the radius to999.9‰ӾÀ . (The yield strength is not exceeded.)

In Fig. 12-73, a uniform beam with a weight of 60 Nand a length of 3.2″¾ is hinged at its lower end, and a horizontal force of magnitude 50 N acts at its upper end. The beam is held vertical by a cable that makes angle θ=25°with the ground and is attached to the beam at height h=2.0″¾ . What are (a) the tension in the cable and (b) the force on the beam from the hinge in unit-vector notation?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.