/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q37P A heat pump is used to heat a bu... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

A heat pump is used to heat a building. The external temperature is less than the internal temperature. The pump’s coefficient of performance is 3.8, and the heat pump delivers 7.54 MJ as heat to the building each hour. If the heat pump is a Carnot engine working in reverse, at what rate must work be done to run it?

Short Answer

Expert verified

The rate of work that must be done to run the reverse Carnot engine is 436.4 W

Step by step solution

01

The given data

Pump performance isKperformance=3.8

Heat delivered by the pump isQH=7.54MJ106J1MJ=7.54×106J

02

Understanding the concept of the Carnot engine

We use the concept of coefficient of performance of the heat pump and coefficient of performance of Carnot’s engine. Using, the coefficient of performance of the heat pump, we can get the work done by the engine to run it properly.

Formula:

The formula of coefficient of performance,Kheatpump=QHW (1)

are heat energy and work done respectively.

If the heat pump works in a reverse manner to Carnot’s engine, then

Kheatpump=1+Kengine (2)

03

Calculation of the rate of work to be done by the engine

Heat Pump works in a reverse manner to Carnot’s engine, so using equation (2) in equation (1), we get the work that must be done by the Carnot engine can be given as:

QHW=1+KengineQH/tW/T=1+KengineQH/t1+KengineW/tWt=7.54×106J×13600s1+3.8Wt=436.4W

Hence, the rate of work done is 436.4 W

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A mixture of1773g of water and 227gof ice is in an initial equilibrium state at 0.000°C. The mixture is then, in a reversible process, brought to a second equilibrium state where the water – ice ratio, by mass, is 1.00 : 1.00at0.000°C. (a)Calculate the entropy change of the system during this process. (The heat of fusion for water is 333 kJ/kg.)(b) The system is then returned to the initial equilibrium state in an irreversible process (say, by using a Bunsen burner). Calculate the entropy change of the system during this process. (c)Are your answers consistent with the second law of thermodynamics?

At very low temperatures, the molar specific heat CVof many solids is approximately Cv=AT3, where depends on the particular substance. For aluminum,A=3.15×10-5J/mol.K4. Find the entropy change for 4.00 mlof aluminum when its temperature is raised from 5.00 kto 10.0 k.

(a) For 1.0molof a monatomic ideal gas taken through the cycle in Figure, whereV1=4.00V0 , what isW/p0V0 as the gas goes from state a to state calong path abc ?(b)What isrole="math" localid="1661581522914" ∆Eint/p0V0 in going from bto cand(c)What is∆Eint/p0V0 in going through one full cycle?(d)What is∆S in going from bto cand(e)What is∆Sin going through one full cycle?

A 2.0 molsample of an ideal monatomic gas undergoes the reversible process shown in Figure. The scale of the vertical axis is set byTs=400.0Kand the scale of the horizontal axis is set bySs=20.0J/k. (a) How much energy is absorbed as heat by the gas? (b) What is the change in the internal energy of the gas? (c) How much work is done by the gas?

Suppose 2.00 molof a diatomic gas is taken reversibly around the cycle shown in the T-S diagram of Fig. 20-35, whereS1=6.00J/KandS2=8.00J/K. The molecules do not rotate or oscillate. What is the energy transferred as heat Qfor (a) path1→2, (b) path2→3, and (c) the full cycle? (d) What is the worxk Wfor the isothermal process? The volume V1 in state 1 is0.200m3. What is the volume in (e) State 2 and (f) state 3? What is the change∆Eintfor (g) path1→2, (h) path2→3, and (i) the full cycle? (Hint:(h) can be done with one or two lines of calculation using Module 19-7 or with a page of calculation using Module 19-9.) (j) What is the work Wfor the adiabatic process?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.