/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q67P A 500 W heating unit is designe... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

A 500 Wheating unit is designed to operate with an applied potential difference of115 V. (a) By what percentage will its heat output drop if the applied potential difference drops to110 V? Assume no change in resistance. (b) If you took the variation of resistance with temperature into account, would the actual drop in heat output be larger or smaller than that calculated in (a)?

Short Answer

Expert verified
  1. The percentage that the unit will heat output drops if the applied potential difference drops to 110 V be -8.6% .
  2. If variation in resistance with temperature is taken into consideration than the actual drop in will be smaller.

Step by step solution

01

The given data:

The power of the heating unit, P = 500 W

Initial potential difference,V1=115V

The new potential difference,V2=110V

02

Understanding the concept of the power and potential difference:

The force is proportional to the square of the potential. From this calculate the percentage change in performance. As temperature decreases, resistance also decreases, but power is inversely proportional to resistance, so as resistance decreases, power increases. Thus, the actual drop in will be smaller if you take into account the temperature dependence of the resistance.

Formula:

The power generated due to a potential difference in a battery,

P=V2R ….. (1)

Here, V is the potential difference and R is the resistance.

03

(a) Calculation of the percentage of the heating element to have a potential drop of 110 V :

From equation (1), you can get that power is directly proportional to the square of the potential difference. Thus, it gives

∆P∞∆V2

Now, the differential equation of the power using the above condition can be given as:

∆P=2V∆V

Where, ∆Pis the change in power and ∆Vis the change in the potential.

Thus, you can calculate percentage change in power as follows:

∆P/P=2∆V/V=2V2-V1V1

Substitute known valued in the above equation.

∆P/P=2110-115110=-0.086=-8.6%

Hence, the value of the percentage is 8.6 %.

04

(b) Calculation of the behavior of the actual drop in the output heat:

At lower temperature, R also decreases, but P is inversely proportional to resistance considering equation (1).

Thus, as resistance decreases, power increases. i.e.

P∞R-1

Hence, the actual drop in P will be smaller when the temperature dependence of the resistance taken in to consideration.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A coil is formed by winding 250turnsof insulated 16-gauge copper wire (diameter = 1.3 mm) in a single layer on a cylindrical form of radius 12cm. What is the resistance of the coil? Neglect the thickness of the insulation. (Use Table 26-1.)

Earth’s lower atmosphere contains negative and positive ions that are produced by radioactive elements in the soil and cosmic rays from space. In a certain region, the atmospheric electric field strength is 120V/mand the field is directed vertically down. This field causes singly charged positive ions, at a density of 620cm-3 , to drift downward and singly charged negative ions, at a density of 550cm-3 , to drift upward (Figure). The measured conductivity of the air in that region is2.70×10-14(Ω·m)-1. Calculate (a) the magnitude of the current density and (b) the ion drift speed, assumed to be the same for positive and negative ions.

A small but measurable current of1.2×10-10Aexists in a copper wire whose diameter is 2.5 mm.The number of charge carriers per unit volume is8.49×1028m-3. Assuming the current is uniform, calculate the (a) current density and (b) electron drift speed.

A cylindrical resistor of radius 5.00mm and length2.0 cmis made of material that has a resistivity of 3.5×10-5Ω.m .What are (a) the magnitude of the current density and (b) the potential difference when the energy dissipation rate in the resistor is 1.0 W?

Figure-agives the magnitude E(x) of the electric fields that have been set up by a battery along a resistive rod of length 9.00mm(Figure-b). The vertical scale is set by. Es=4.00×103V/mThe rod consists of three sections of the same material but with different radii. (The schematic diagram of Figure-bdoes not indicate the different radii.) The radius of section 3 is 2.00mm. (a) What is the radius of section 1 and (b) What is the radius of section 2?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.