/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q84P Question: In your physics lab yo... [FREE SOLUTION] | 91影视

91影视

Question: In your physics lab you release a small glider from rest at various points on a long, frictionless air track that is inclined at an angle above the horizontal. With an electronic photocell, you measure the time it takes the glider to slide a distance from the release point to the bottom of the track. Your measurements are given in Fig. P2.84, which shows a second-order polynomial (quadratic) fit to the plotted data. You are asked to find the glider鈥檚 acceleration, which is assumed to be constant. There is some error in each measurement, so instead of using a single set of x and t values, you can be more accurate if you use graphical methods and obtain your measured value of the acceleration from the graph. (a) How can you re-graph the data so that the data points fall close to a straight line? (Hint: You might want to plot or , or both, raised to some power.) (b) Construct the graph you described in part (a) and find the equation for the straight line that is the best fit to the data points. (c) Use the straight line fit from part (b) to calculate the acceleration of the glider. (d) The glider is released at a distance x = 1.35 from the bottom of the track. Use the acceleration value you obtained in part (c) to calculate the speed of the glider when it reaches the bottom of the track.

Short Answer

Expert verified

Answer

(a) A graph x-t2is required to make the data points fall close to a straight line.

(b) The equation of the straight line that best fits to the data points is x=3.8t2+0.009.

(c) The acceleration of the glider is 7.6m/s2.

(d) The speed of the glider when it reaches the bottom of the track is 4.509m/s.

Step by step solution

01

Identification of given data 

The given data is listed below as:

  • The angle of inclination of the glider is ,
  • The distance from the release point to the track鈥檚 bottom point is, x
  • The time taken by the glider to reach the distance is, t
  • The distance of the glider from the track鈥檚 bottom is, x= 1.35m
02

Significance of the acceleration of an object 

The acceleration of an object is described as the rate at which the velocity changes with the change in time. The acceleration is the division of the rate of change of velocity with time.

03

 Step 3: (a) Determination of re-graphing the data given in the graph 

For making the data points fall along a straight line, ax-t2 graph is required. The reason that the graph is required is that with the increase of the time, the distance also increases but if the time increases at a fast face, the distance will also increase then the x-t2graph will be a straight line.

Thus, ax-t2 graph is required to make the data points fall close to a straight line.

04

(b) Determination of the graph and the equation

The graphx-t2 has been provided below:

Here, from the above graph, it has been identified that the data points fall along a straight line. Moreover, the equation of the straight line has also been obtained with the help of the data points that isx=3.8t2+0.009 .

The equation obtained from the graph is expressed as:

x=3.8t2+0.009 鈥(颈)

Here, x is the distance from the release point to the track鈥檚 bottom point and t is the time taken by the glider to reach the distance.

Thus, the equation of the straight line that best fits to the data points is x=3.8t2+0.009.

05

(c) Determination of the acceleration of the glider

The equation obtained from the graph is expressed as:

x=3.8t2+0.009

Here, x is the distance from the release point to the track鈥檚 bottom point and t is the time taken by the glider to reach the distance.

Double differentiating the above equation with respect to the time , the above equation can be expressed as:

dxdt=7.6t=vd2xdt2=7.6=a 鈥(颈颈)

As the acceleration is described as the rate of the change of velocity with time, then the acceleration of the glider is 7.6m/s2.

Thus, the acceleration of the glider is 7.6m/s2.

06

 Step 6: (d) Determination of the speed of the glider

Recalling the equation (i) in order to find the speed of the glider.

x=3.8t2+0.009

Here, x is the distance from the release point to the track鈥檚 bottom point and t is the time taken by the glider to reach the distance.

Substitute x fori.35 in the above equation.

1.35=3.8t2+0.0093.8t2=1.341t2=0.352t=0.593

The negative value t of the time is neglected as the time cannot be negative.

Here, the value of the time t has been obtained as 0.53s. With the help of this, the speed of the glider can be obtained.

From the equation (ii), the speed of the glider can be expressed as:

v = 7.6 t

Substitute for in the above equation.

v=7.60.593=4.509

Hence, the speed of the glider when it reaches the bottom of the track is4.509m/s .

Thus, the speed of the glider when it reaches the bottom of the track is4.509m/s .

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A rather ordinary middle-aged man is in the hospitalfor a routine checkup. The nurse writes 鈥200鈥 on the patient鈥檚medical chart but forgets to include the units. Which of these quantities could the 200 plausibly represent? The patient鈥檚 (a) mass in kilograms; (b) height in meters; (c) height in centimeters;(d) height in millimeters; (e) age in months

A car travels in the +x-direction on a straight and level road. For the first 4.00 s of its motion, the average velocity of the car is Vav-x=6.25m/s. How far does the car travel in 4.00 s?

The planet Uranus has a radius of 25360鈥塳尘and a surface acceleration due to gravity of9.0鈥尘/s2at its poles. Its moon Miranda (discovered by Kuiper in 1948) is in a circular orbit about Uranus at an altitude of 104000鈥塳尘above the planet鈥檚 surface. Miranda has a mass of6.61019鈥塳驳and a radius of 236km(a) Calculate the mass of Uranus from the given data. (b) Calculate the magnitude of Miranda鈥檚 acceleration due to its orbital motion about Uranus. (c) Calculate the acceleration due to Miranda鈥檚 gravity at the surface of Miranda. (d) Do the answers to parts (b) and (c) mean that an object releasedabove Miranda鈥檚 surface on the side toward Uranus will fall up relative to Miranda? Explain.

You throw a glob of putty straight up toward the ceiling,which is 3.60 m above the point where the putty leaves your hand.The initial speed of the putty as it leaves your hand is 9.50 m/s.

(a) What is the speed of the putty just before it strikes the ceiling?

(b) How much time from when it leaves your hand does it take theputty to reach the ceiling?

For the hydraulic lift shown in Fig. 12.7, what must be the ratio of the diameter of the vessel at the car to the diameter of the vessel where the force F1 is applied so that a 1520-kg car can be lifted with a force F1 of just 125 N?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.