/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q 29E Question: A 45.0-kg crate of too... [FREE SOLUTION] | 91Ó°ÊÓ

91Ó°ÊÓ

Question: A 45.0-kg crate of tools rests on a horizontal floor. You exert a gradually increasing horizontal push on it, and the crate just begins to move when your force exceeds 313 N. Then you must reduce your push to 208 N to keep it moving at a steady 25.0m/s. (a) What are the coefficients of static and kinetic friction between the crate and the floor? (b) What push must you exert to give it an acceleration of 1.10m/s2? (c) Suppose you were performing the same experiment on the moon, where the acceleration due to gravity is 1.62m/s2. (i) What magnitude push would cause it to move? (ii) What would its acceleration be if you maintained the push in part (b)?

Short Answer

Expert verified

a) The coefficient of static friction is, 0.700 and kinetic friction is, 0.471.

b) The push must exerted to give acceleration is, 257.2 N.

c) (i) The magnitude push which cause it to move is, 51.03 N.

(ii) The acceleration is, 4.95m/s2.

Step by step solution

01

Identification of given data

The given data can be listed below as,

  • The mass of the crate is, m = 45.0kg.
  • The force when crate just begin to move is, Fs=313N.
  • The force to keep crate moving is, Fk=208N.
  • The steady speed of crate is, v=25.0m/s.
02

Significance of friction

Friction is an opposing force which resist one surface to slide over another surface when two surface are in contact with each other.

03

Determination of coefficient of static friction and kinetic friction.

The expression for the maximum static force can be expressed as,

Fs=μsmgμs=Fsmg

Here μsis the coefficient of static friction, Fsis the static force, m is the mass of the crate, and g is acceleration due to gravity.

Substitute, 313 N for Fs, 45.0 kg for m, 9.8m/s2for g in the above equation.

μs=313N45.0kg×9.8m/s2=0.700

Hence, required coefficient of static friction is, 0.700.

The expression for the maximum kinetic force can be expressed as,

Fk=μkmgμk=Fkmg

Here μkis the coefficient of kinetic friction, Fkis the maximum kinetic force.

Substitute 208 N for Fk, 45.0 kg for m, 9.8m/s2for g in the above equation.

μk=208N45.0kg×9.8m/s2=0.471

Hence, required coefficient of kinetic friction is, 0.471.

04

determination of pushing force.

The expression for the pushing force on crate according to Newton’s second law can be expressed as,

F=ma+μkmg

Here m is the mass, a is the acceleration, and μkis the coefficient of kinetic friction, and g is the acceleration due to gravity.

Substitute 45.0 kg for m, 0.471 for μk, and 1.10m/s2for a, 9.8m/s2for g in the above equation.

F=(45.0kg)(1.10m/s2)+(0.471)(45.0kg)(9.8m/s2)=257.2N

Hence, required force is, 257.2 N.

05

Determination of magnetic push and the acceleration on the moon.

Part (i)

The expression for static force on the moon can be expressed as,

Fs=μsmg

Here μsis the coefficient of static friction, m is the mass, and g is the acceleration due to gravity on moon.

Substitute 0.700 for μs, 45.0 kg for m, and 1.62m/s2for g in the above equation.

Fs=(0.700)(45.0kg)(1.62m/s2)=51.03N

Hence, required magnitude to move is, 51.03.

Part (ii)

The expression for acceleration in this condition can be expressed as,

F-μkmg=maa=F-μkmgm

Here F is pushing force, m is the mass, g is the acceleration due to gravity, and μkis the coefficient of kinetic friction.

Substitute 257.2 N for F, 0.471 for μk, 45.0 kg for m, 1.62m/s2for g in the above equation.

data-custom-editor="chemistry" a=257.2N-(0.471)(45.0kg)(1.62m/s2)45.0kg=4.95m/s2

Hence, required acceleration is, 4.95m/s2.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91Ó°ÊÓ!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

For a spherical planet with mass M, volume V, and radius R,derive an expression for the acceleration due to gravity at the planet’s surface, g, in terms of the average density of the planet, ÒÏ=M/V, and the planet’s diameter, D=2R. The table gives the values of Dand gfor the eight major planets:

(a) Treat the planets as spheres. Your equation for as a function of and shows that if the average density of the planets is constant, a graph of versus will be well represented by a straight line. Graph as a function of for the eight major planets. What does the graph tell you about the variation in average density? (b) Calculate the average density for each major planet. List the planets in order of decreasing density, and give the calculated average density of each. (c) The earth is not a uniform sphere and has greater density near its center. It is reasonable to assume this might be true for the other planets. Discuss the effect this nonuniformity has on your analysis. (d) If Saturn had the same average density as the earth, what would be the value of at Saturn’s surface?

A plastic ball has radius 12.0 cm and floats in water with 24.0% of its volume submerged. (a) What force must you apply to the ball to hold it at rest totally below the surface of the water? (b) If you let go of the ball, what is its acceleration the instant you release it?

Calculate the earth’s gravity force on a 75-kg astronaut who is repairing the Hubble Space Telescope 600 km above the earth’s surface, and then compare this value with his weight at the earth’s surface. In view of your result, explain why it is said that astronauts are weightless when they orbit the earth in a satellite such as a space shuttle. Is it because the gravitational pull of the earth is negligibly small?

The density of gold is 19.3 g/cm3 . What is this value in kilograms per cubic meter?

In Wagner’s opera Das Rheingold,the goddess Freia is ransomed for a pile of gold just tall enough and wide enough to hide her from sight. Estimate the monetary value of this pile. The density of gold is 19.3 g/cm3, and take its value to be about $10 per gram.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.