/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none}

91影视

Roofs of houses are sometimes 鈥渂lown鈥 off (or are they pushed off?) during a tornado or hurricane. Explain using Bernoulli鈥檚 principle.

Short Answer

Expert verified

The pressure difference inside the room and over the roof tends the roof of the house to blow off.

Step by step solution

01

Understanding Bernoulli’s Principle

When the wind speed is low, the pressure becomes higher, and when the speed is higher, the pressure becomes lower, as stated by Bernoulli's principle. The air particles always tend to move from higher to lower pressure.

02

Reasoning behind the condition

The roofs of the house during a tornado or hurricane are blown off because, during the storms, the speed of the wind is very high. Due to the high speed of the wind, the pressure over the roof becomes very small, which is according to Bernoulli鈥檚 principle.

Now, the pressure inside the room remains at its initial level, but the pressure over the roof increases, which results in the pressure difference between the two areas. This pressure difference gives the upward lift to the roof, and when the magnitude of upward lift increases than the gravitational pull, the roof is blown off.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

(II) A two component model used to determine percent body fat in a human body assumes that a fraction \(f\left( { < 1} \right)\) of the body鈥檚 total mass m is composed of fat with a density of \({\rm{0}}{\rm{.90 g/c}}{{\rm{m}}^3}\), and that the remaining mass of the body is composed of fat-free tissue with a density of \({\rm{1}}{\rm{.10 g/c}}{{\rm{m}}^3}\). If the specific gravity of the entire body鈥檚 density is \({\rm{X}}\), show that the percent body fat \(\left( { = f \times 100} \right)\)is given by

\(\% {\rm{Body fat}} = \frac{{{\rm{495}}}}{X} - 450\).

Blood is placed in a bottle 1.40 m above a 3.8-cm-long needle, of inside diameter 0.40 mm, from which it flows at a rate of \({\bf{4}}{\bf{.1}}\;{\bf{c}}{{\bf{m}}^{\bf{3}}}{\bf{/min}}\). What is the viscosity of this blood?

(II) A \({\rm{0}}{\rm{.48 kg}}\)piece of wood floats in water but is found to sink in alcohol \(\left( {SG = 0.79} \right)\), in which it has an apparent mass of\({\rm{0}}{\rm{.047 kg}}\). What is the SG of the wood

(II)What is the lift (in newtons) due to Bernoulli鈥檚 principle on a wing of area\(88\;{{\rm{m}}^2}\)if the air passes over the top and bottom surfaces at speeds of 280 m/s and 150 m/s, respectively?

A viscometer consists of two concentric cylinders, \({\bf{10}}{\bf{.20}}\;{\bf{cm}}\) and \({\bf{10}}{\bf{.60}}\;{\bf{cm}}\)in diameter. A liquid fills the space between them to a depth of \({\bf{12}}{\bf{.0}}\;{\bf{cm}}\). The outer cylinder is fixed, and a torque of \({\bf{0}}{\bf{.024}}\;{\bf{m}} \cdot {\bf{N}}\) keeps the inner cylinder turning at a steady rotational speed of \({\bf{57}}\;{\bf{rev/min}}\). What is the viscosity of the liquid?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.