/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Problem 18 A transparent film \((n=1.3)\) i... [FREE SOLUTION] | 91影视

91影视

Log out

Learning Materials

Features

Discover

Chapter 25: Problem 18

A transparent film \((n=1.3)\) is deposited on a glass lens \((n=1.5)\) to form a nonreflective coating. What is the minimum thickness that would minimize reflection of light with wavelength \(500.0 \mathrm{nm}\) in air?

Short Answer

Expert verified
Answer: The minimum thickness of the nonreflective coating is approximately 96.15 nm.

Step by step solution

01

Calculate the wavelength of light in the thin film

The refractive index of the film is given by \(n_{film} = 1.3\). The wavelength of light in air is given by \(\lambda_{air} = 500 \thinspace nm\). The wavelength of light in the thin film is given by: $$ \lambda_{film} = \frac{\lambda_{air}}{n_{film}}. $$ Plug in the given values and solve for \(\lambda_{film}\): $$ \lambda_{film} = \frac{500 \thinspace nm}{1.3}. $$
02

Calculate the minimum thickness of the thin film

To minimize reflection, the path difference between the light waves reflected from both the surfaces of the thin film must be equal to half of the wavelength in the thin film, or \(\frac{\lambda_{film}}{2}\). Since the light travels through the thin film twice before exiting (once going in and once coming out), the path difference is equal to \(2t\) (where \(t\) is the thickness of the film). Therefore, we have: $$ 2t = \frac{\lambda_{film}}{2}. $$ Divide by 2 and plug in the value of \(\lambda_{film}\) from Step 1: $$ t = \frac{\frac{500 \thinspace nm}{1.3}}{4}. $$
03

Calculate the result

Finally, perform the calculations to find the minimum thickness \(t\): $$ t = \frac{500 \thinspace nm}{1.3 \times 4} = \frac{500}{5.2} \thinspace nm \approx 96.15 \thinspace nm. $$ The minimum thickness that would minimize reflection of light with wavelength \(500.0 \thinspace nm\) in air is about \(96.15 \thinspace nm\).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

The radio telescope at Arecibo, Puerto Rico, has a reflecting spherical bowl of \(305 \mathrm{m}(1000 \mathrm{ft})\) diameter. Radio signals can be received and emitted at various frequencies with appropriate antennae at the focal point of the reflecting bowl. At a frequency of \(300 \mathrm{MHz}\), what is the angle between two stars that can barely be resolved? (Tutorial:radio telescope).
Light of wavelength 589 nm incident on a pair of slits produces an interference pattern on a distant screen in which the separation between adjacent bright fringes at the center of the pattern is \(0.530 \mathrm{cm} .\) A second light source, when incident on the same pair of slits, produces an interference pattern on the same screen with a separation of $0.640 \mathrm{cm}$ between adjacent bright fringes at the center of the pattern. What is the wavelength of the second source? [Hint: Is the small-angle approximation justified?]

If diffraction were the only limitation, what would be the maximum distance at which the headlights of a car could be resolved (seen as two separate sources) by the naked human eye? The diameter of the pupil of the eye is about \(7 \mathrm{mm}\) when dark-adapted. Make reasonable estimates for the distance between the headlights and for the wavelength.
Find the height \(h\) of the pits on a CD (Fig. \(25.6 \mathrm{a}\) ). When the laser beam reflects partly from a pit and partly from land (the flat aluminum surface) on either side of the "pit," the two reflected beams interfere destructively; \(h\) is chosen to be the smallest possible height that causes destructive interference. The wavelength of the laser is \(780 \mathrm{nm}\) and the index of refraction of the poly carbonate plastic is \(n=1.55.\)
Two radio towers are a distance \(d\) apart as shown in the overhead view. Each antenna by itself would radiate equally in all directions in a horizontal plane. The radio waves have the same frequency and start out in phase. A detector is moved in a circle around the towers at a distance of $100 \mathrm{km}.$ The waves have frequency \(3.0 \mathrm{MHz}\) and the distance between antennas is \(d=0.30 \mathrm{km} .\) (a) What is the difference in the path lengths traveled by the waves that arrive at the detector at \(\theta=0^{\circ} ?\) (b) What is the difference in the path lengths traveled by the waves that arrive at the detector at \(\theta=90^{\circ} ?\) (c) At how many angles $\left(0 \leq \theta<360^{\circ}\right)$ would you expect to detect a maximum intensity? Explain. (d) Find the angles \((\theta)\) of the maxima in the first quadrant \(\left(0 \leq \theta \leq 90^{\circ}\right) .\) (e) Which (if any) of your answers to parts (a) to (d) would change if the detector were instead only $1 \mathrm{km}$ from the towers? Explain. (Don't calculate new values for the answers.)
See all solutions

Recommended explanations on Physics Textbooks

Torque and Rotational Motion

Read Explanation

Astrophysics

Read Explanation

Electrostatics

Read Explanation

Electric Charge Field and Potential

Read Explanation

Magnetism

Read Explanation

Dynamics

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.