/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Problem 10 What is flow separation? What ca... [FREE SOLUTION] | 91影视

91影视

Log out

Learning Materials

Features

Discover

Chapter 7: Problem 10

What is flow separation? What causes it? What is the effect of flow separation on the drag coefficient?

Short Answer

Expert verified
Briefly explain what flow separation is, its causes, and its effect on the drag coefficient. Flow separation is the deviation of fluid particles from their original streamline path due to adverse pressure gradients, leading to the formation of a low-pressure, recirculating flow region. It is primarily caused by adverse pressure gradients, body shape, surface roughness, fluid viscosity, and turbulence in the flow. Flow separation increases the drag coefficient as it contributes to higher pressure drag, increased turbulence, and skin friction drag.

Step by step solution

01

Definition of Flow Separation

Flow separation is a phenomenon that occurs when the fluid particles adjacent to a solid body (such as an airfoil or pipe wall) deviate from their original streamline path due to the influence of adverse pressure gradients. This results in the formation of a separated flow region, characterized by the presence of a low-pressure, recirculating flow.
02

Causes of Flow Separation

Flow separation is primarily caused by an adverse pressure gradient - a situation where the pressure increases in the flow direction along the body's surface. This pressure increase causes the fluid particles to slow down and lose their kinetic energy. If the adverse pressure gradient is strong enough, it can cause the fluid to come to a complete stop near the body's surface (forming a boundary layer) and reverse its direction, leading to flow separation. Other factors contributing to flow separation include the body's shape and surface roughness, fluid viscosity, and the presence of turbulence in the flow.
03

Effect of Flow Separation on Drag Coefficient

Flow separation has a significant impact on the drag coefficient, causing an increase in drag. Drag is the force acting opposite to the relative motion of the fluid, and it is a result of pressure and viscous forces acting on the body's surface. Flow separation causes an increase in the pressure drag component, due to the low-pressure region that forms behind the separated zone. The higher the level of flow separation, the larger the pressure drag contribution and the higher the drag coefficient. Additionally, flow separation can cause increased turbulence and skin friction drag, further increasing the overall drag on the body. In conclusion, flow separation is when fluid adjacent to a solid body deviates from its original path due to adverse pressure gradients, leading to recirculating flow in the separated region. It is caused by factors such as body shape, surface roughness, fluid viscosity, and turbulence. Flow separation increases the drag coefficient, as it increases pressure drag, turbulence, and skin friction.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

Key Concepts

These are the key concepts you need to understand to accurately answer the question.

Drag Coefficient
The drag coefficient, denoted as \( C_d \), is a dimensionless quantity used to quantify the drag or resistance of an object in a fluid environment, such as air or water. It is used to model the force of drag exerted by the fluid against the object, which directly affects the object's ability to move through the fluid. The drag coefficient is a complex value that encompasses various forms of resistance like pressure drag and skin friction drag, which are related to flow separation.

The drag coefficient is affected by the shape of the object, its surface roughness, the viscosity and density of the fluid, and the velocity of the fluid flow. Optimizing the aerodynamic shape of an object can significantly reduce the drag coefficient, leading to more efficient movement. For example, a streamlined airfoil is designed to have a low drag coefficient to improve lift and performance in flight.
Adverse Pressure Gradient
An adverse pressure gradient occurs when the pressure in a fluid flow increases in the direction of the flow. This scenario is commonly found in the boundary layer over the surface of an object, such as the wing of an airplane or the hull of a ship. As the fluid particles near the surface slow down due to viscous effects, they encounter increasing pressure from the faster-moving fluid particles further away from the surface.

This increase in pressure can force the slower particles to lose momentum and in severe cases, reverse direction, which contributes to the phenomenon of flow separation. Engineering designs aim to minimize adverse pressure gradients to prevent separation and reduce drag forces. Adjustments to the shape of objects in flow can help maintain a more favorable pressure gradient, promoting a boundary layer that stays attached for a longer distance along the surface.
Boundary Layer
The boundary layer is a thin layer of fluid that forms on the surface of an object moving through a fluid or when a fluid flows past a stationary object. Within this layer, the effects of viscosity are significant, and the velocity of the fluid changes from zero at the surface (due to the no-slip condition) to the free-flow velocity of the fluid outside the boundary layer.

Understanding the boundary layer is crucial because its behavior affects both the drag experienced by the object and the likelihood of flow separation. The control of the boundary layer through various techniques, such as smooth surfaces or the addition of turbulators, can delay separation and improve the aerodynamic efficiency of the object.
Pressure Drag
Pressure drag, also known as form drag, arises from the pressure differential between the front and back of a body moving through a fluid. This form of drag is particularly significant when flow separates from the surface of an object, creating a low-pressure wake behind it.

Pressure drag is influenced by the shape of the object and is the primary source of drag for bluff bodies, such as a cylinder or a square. These shapes cause a large separated flow region with high pressure drag. Streamlined bodies, in contrast, generate smaller wakes and thus have reduced pressure drag. Reducing the surface area facing the flow and smoothing the path for the fluid to follow around the object can minimize pressure drag, hence improving the object's performance in the fluid.

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

What is the difference between the upstream velocity and the free-stream velocity? For what types of flow are these two velocities equal to each other?

Water at \(43.3^{\circ} \mathrm{C}\) flows over a large plate at a velocity of \(30.0 \mathrm{~cm} / \mathrm{s}\). The plate is \(1.0 \mathrm{~m}\) long (in the flow direction), and its surface is maintained at a uniform temperature of \(10.0^{\circ} \mathrm{C}\). Calculate the steady rate of heat transfer per unit width of the plate. 7-24 The forming section of a plastics plant puts out a continuous sheet of plastic that is \(1.2 \mathrm{~m}\) wide and \(2 \mathrm{~mm}\) thick at a rate of \(15 \mathrm{~m} / \mathrm{min}\). The temperature of the plastic sheet is \(90^{\circ} \mathrm{C}\) when it is exposed to the surrounding air, and the sheet is subjected to air flow at \(30^{\circ} \mathrm{C}\) at a velocity of \(3 \mathrm{~m} / \mathrm{s}\) on both sides along its surfaces normal to the direction of motion of the sheet. The width of the air cooling section is such that a fixed point on the plastic sheet passes through that section in \(2 \mathrm{~s}\). Determine the rate of heat transfer from the plastic sheet to the air.

Mercury at \(25^{\circ} \mathrm{C}\) flows over a 3 -m-long and \(2-\mathrm{m}\)-wide flat plate maintained at \(75^{\circ} \mathrm{C}\) with a velocity of \(0.8 \mathrm{~m} / \mathrm{s}\). Determine the rate of heat transfer from the entire plate.

What is lift? What causes it? Does wall shear contribute to the lift?

For laminar flow of a fluid along a flat plate, one would expect the largest local convection heat transfer coefficient for the same Reynolds and Prandl numbers when (a) The same temperature is maintained on the surface (b) The same heat flux is maintained on the surface (c) The plate has an unheated section (d) The plate surface is polished (e) None of the above
See all solutions

Recommended explanations on Physics Textbooks

Conservation of Energy and Momentum

Read Explanation

Rotational Dynamics

Read Explanation

Scientific Method Physics

Read Explanation

Radiation

Read Explanation

Torque and Rotational Motion

Read Explanation

Electric Charge Field and Potential

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.