Problem 9 How is an artesian well differen... [FREE SOLUTION]

Chapter 19: Problem 9

How is an artesian well different from an ordinary well?

Short Answer

Expert verified

An artesian well is different from an ordinary well in how water is brought to the surface, its structure, and the geological conditions required. In an ordinary well, a pump is used to draw water up, while in an artesian well, natural pressure forces the water up. Ordinary wells are basic holes in the ground, while artesian wells involve a more sophisticated structure with water confined under a layer of impermeable rock or clay. Furthermore, ordinary wells can be dug anywhere with an accessible water table, whereas artesian wells require specific geological conditions, including a confined aquifer between low-permeability layers and sufficient water pressure.

Step by step solution

Understanding an Ordinary Well

An ordinary well, also known as a dug well, is a man-made hole in the ground that goes deep until it reaches the water table, which is the upper reach of the ground water. It's a basic well which collects water that seep in from the ground. Thus, its water yield depends on the permeability of the soil and the nearness of the water table.

Understanding an Artesian Well

An artesian well, on the other hand, is a type of well that doesn't require a pump to bring the water to the surface. This happens when there is enough pressure in the aquifer. The water in an artesian aquifer is confined under a layer of impermeable rock or clay that is under pressure. When a well is drilled into this confined aquifer, it's the pressure that forces the water, sometimes quite high above the ground.

Comparing the Two Types of Wells

The major difference between the two types of wells lays in how the water is brought to the surface. In an ordinary well, a pump is used to draw water up from the well, while in an artesian well, natural pressure forces the water up. Another difference is their structure; an ordinary well is basically just a hole in the ground, while an artesian well involves a more sophisticated structure, with its water confined under a layer of impermeable rock or clay.

Highlighting the Geological Conditions

The differences also extend to the geological conditions needed for each type of well. Ordinary wells can be dug anywhere the water table is within easy reach. But artesian wells require specialized geological conditions, requiring an aquifer which is confined between layers of low-permeability rock or clay and where the water is under enough pressure to be forced up the well. In conclusion, though both types of wells serve the same primary purpose - to provide water, the manner in which they do so, their structures, and the geological conditions necessary for their existence are the main differentiating factors.

Unlock Step-by-Step Solutions & Ace Your Exams!

Full Textbook Solutions
Get detailed explanations and key concepts
Unlimited Al creation
Al flashcards, explanations, exams and more...
Ads-free access
To over 500 millions flashcards
Money-back guarantee
We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with 91影视!

Key Concepts

These are the key concepts you need to understand to accurately answer the question.

Artesian Wells

Artesian wells are fascinating geological formations that rely on natural pressure to bring water to the surface. These wells are uniquely different because they do not require a mechanical pump. The key lies within the aquifer, which must be confined between layers of impermeable strata such as rock or clay.
These layers trap water under significant pressure due to the weight of water at higher elevations recharging the aquifer. When a well is drilled into this aquifer, the pressure is sufficient to push the water up and sometimes out, even reaching heights above the ground surface.

Considered more of a natural phenomenon due to the reliance on geological conditions.
Commonly tapped in areas where sufficient geological pressure exists.
Confinement and pressure are essential to their operation.

Artesian wells harness the earth's natural processes for ease of water supply.

Ordinary Wells

Ordinary wells, known as dug wells, are structures made by humans to access groundwater. They involve simply digging a hole into the ground until it reaches the water table. Unlike artesian wells, the water from ordinary wells must be lifted using a pump.
The water collection in these wells primarily depends on the soil's permeability and the water table's proximity. As a result, the yield and efficiency of ordinary wells can vary significantly.

Often made where the groundwater is near the surface.
Structure is straightforward, essentially a hole reaching the groundwater.
Efficiency can be influenced by environmental factors such as drought.

These wells are prevalent due to their simplicity but depend on manual intervention for water retrieval.

Geological Conditions

The geological conditions play a crucial role in the formation and function of water wells. For ordinary wells, the primary requirement is a reachable water table. They can potentially be constructed in a variety of places as long as these conditions are met.
On the other hand, artesian wells need much more specific geological conditions. These wells only form when a permeable aquifer, filled with water, is trapped between layers of less permeable material, like clay or shale.
Understanding these conditions helps determine the most suitable type of well for a given location.

Artesian wells need circumstances that naturally maintain water pressure.
Ordinary wells are feasible where the water table is accessible.

Different geological settings provide varied potential for well construction.

Groundwater Pressure

Groundwater pressure is a vital aspect in the dynamics of well types, particularly artesian wells. In essence, it is the force exerted by the water within an aquifer and is determined by the hydraulic head, or water level, in the aquifer.
In artesian wells, this pressure is what allows water to flow upward without external assistance, tapping into the natural hydraulic system. The pressure is a result of having a higher recharge area, causing water to be pushed down to where the well is drilled.

Higher pressure means artesian wells can be naturally self-replenishing.
Key to understanding the efficiency of artesian wells.
Directly influenced by the geographic and elevation conditions of the area.

Groundwater pressure showcases the natural power and utility present beneath our feet.

91影视

How is an artesian well different from an ordinary well?

Short Answer

Step by step solution

Understanding an Ordinary Well

Understanding an Artesian Well

Comparing the Two Types of Wells

Highlighting the Geological Conditions

Key Concepts

Artesian Wells

Ordinary Wells

Geological Conditions

Groundwater Pressure

One App. One Place for Learning.

Most popular questions from this chapter

Recommended explanations on Geography Textbooks

Water Cycle

Sustainable Urban Development

Migration and Identity

Energy Security

Challenges In The Human Environment

Living With The Physical Environment

Study anywhere. Anytime. Across all devices.